by Tryptophan on Wed Mar 30, 2005 10:56 pm
All depends on which boxen :-
spinner ->
(PDC) 1.0Ghz Celeron Tualatin 130nano chip, 512Mb RAM, Silicon Image udma6 adapter. 3 * Maxtor Diamondmax 160G 9+ w/8Mb cache(Raid5), a 8Mb 9+ 120Gig drive and a 80gig drive and yes, hacking up fan brackets over the summer for the 35° temps was fun, Ultra2 scsi card with dds-2 tape streamer. FC2/2.6.10 OS.
delphinus ->
generic compaq deskpro 400Mhz pII with 256Meg pc100 RAM runs 2kserver. 6gig disk
Dusky ->
(Internal router) small form-factor compaq deskpro. pII350 with 512Meg pc100 RAM. redhat 8 routing and inet services, 3 nics. 6gig disk, need to update this to FC2 like the rest of my linux boxens.
stenella ->
(media workbench). win2k pro. Palamino 1.4 with 512Meg pc133ddr RAM, IBM 60G GXP-120, dvd-drive, cd-rw, sb live platinum and a 3dlabs wildcat vp760, s3 pci vga card for 2nd monitor, Hauppauge pci-pvr tv card
Bottlenose ->
(border gateway) pII 266, 64Mb ram runs FC2 w/Kernel 2.6.6. Inet gateway through Prism2 (intersil) wireless LAN linux driver and hw external modem (56k, yummy).
lagenorynchus ->
Hmm..not thought of a new use for this one yet. same spec as delphinus. pII400/256/6gig
Orca ->
(workstation) 512k cache enabled Thorton ( barton-"thoroughbred-b") xp athlon @ 225*10. 1024meg pc225ddr ;-). 2*18G 10,000rpm ultra160 scsi hdd's on an adaptec 19160 card, Ultra wide scsi card feeding a 10gig ultra3 scsi drive for scratch/swap/scanning etc, 3 port Firewire-400 card, Abit nf-7 Nforce2 mainboard with Radeon 9800se -> 9800XT. old udma33 52X cd, sony g200 17" fd trinitron and a Hornet travan-4.
Also responsible for
Whiskey ->
(Parents workstation) duron 1100, 224M pc100 Ram, win2kpro, oooold ati rage pro 64, 3gig disk, nic, etc, ect.
Rich, any reason why you need ECC ram? ECC is server error checking ram, so unless you need yearlong uptime, or have memory issues, I would have thought non-ecc would have been cheaper.